Tai nghe Razer Tiamat 7.1 V2 – Analog (RZ04-02070100-R3M1)

At a Glance

• 10x audio drivers
• Foldable unidirectional microphone
• Audio Control Unit
• 1 USB connector for power
• PC connector: 3.5 mm microphone jack, 4 x 3.5 mm audio jacks

Headphones

• 10 discrete Neodymium magnet drivers. Each ear cup contains:
  Subwoofer:
• 40 mm Titanium coated diaphragm with Neodymium magnets
• Frequency response: 20 Hz – 20,000 HZ
• Impedance: 16 Ω
• Sensitivity @ 1 kHz: 118 dB ± 3dB
• Front:
• 30 mm with Neodymium magnet
• Frequency response: 20 Hz – 20,000 HZ
• Impedance: 32 Ω
• Sensitivity @ 1 kHz: 115 dB ± 3 dB
• Rear:
• 20 mm with Neodymium magnet
• Frequency response: 20 Hz – 20,000 HZ
• Impedance: 32 Ω
• Sensitivity @ 1 kHz: 118 dB ± 3 dB
• Center:
• 30 mm with Neodymium magnet
• Frequency response: 20 Hz – 20,000 HZ
• Impedance: 32 Ω
• Sensitivity @ 1 kHz: 115 dB ± 3 dB
• Side:
• 20 mm with Neodymium magnet
• Frequency response: 20 Hz – 20,000 HZ
• Impedance: 32 Ω
• Sensitivity @ 1 kHz: 118 dB ± 3 dB

Microphone

• Frequency response: 100 – 10,000 HZ
• Sensitivity @1 kHz: -38 dB ± 3 dB
• Signal-to-noise ratio: 58 dB
• Pick-up pattern: Unidirectional ECM microphone

Audio control unit

• Master volume, front speakers, center speakers, subwoofers, side speakers, rear speakers, microphone volume, microphone mute, audio mute, 7.1 surround sound / 2.0 stereo mode toggle and speaker / headset toggle
• Cable: 3 m / 9.8 ft, braided fiber cable
• USB Connector for power
• PC connector: 3.5 mm microphone jack, 4 x 3.5 mm audio jacks
• External speaker connector: 4 x 3.5 mm audio jacks

System requirements

• PC with built-in 3.5 mm audio jacks & 1 USB port (for power)
• PC or motherboard with analog surround sound ports (3.5 mm audio jacks x 5 or more) for true 7.1 surround sound.